Guide des tailles

Size guide

This guide will allow you to know the perfect size for your future jewel.

wrist size

To know the exact size of your wrist circumference, you can use a tailor's tape measure. If you don't have one at your disposal, here is a little tutorial to help you easily measure it in just 5 min. You can ask those around you for help.

- Take a sheet, a pen, a ruler and a roll of tape (optional).

- Cut a thin strip lengthwise. The goal is to wrap it around your wrist to find out the size.

- Place the band around your wrist and fasten it at the tightest with a piece of tape if you feel the need. Mark the crossing.

- Unroll your strip and measure it with a school ruler in centimeters. You will find that the length corresponds to that of a tailor's meter, as we indicate on the guide below.

And There you go ! You now know your wrist circumference.

Know that we are always adding a margin so that the bracelet is perfectly suited on your wrist. If you want it to be looser so you can fit one or more fingers, please specify a slightly larger size, taking into account the slight margin that we add later. If you have any doubts, contact us so that we can guide you in your custom bracelet project!

Length of Necklaces

Currently, we mainly offer two lengths of Necklaces:

- The Necklaces with a length of 45 cm (sometimes with an adjustable extension of + 5 cm)

- The Necklaces with a length of 60 cm.

The following photo shows you the difference in terms of size for two Necklaces of 45 and 60 cm in length. Check that the Necklace you are consulting has several lengths, then choose the one you prefer!

We also carry many Necklaces that you can customize according to the size you want. Check that it is possible or contact us so that we graciously adapt the model presented according to your desires if it is possible for us!

Size of the Rings

Currently, our Rings are mostly adjustable to help you find the model perfectly suited to your needs.

For non-adjustable or adjustable models, here is a list of the sizes we offer:

- Size 6: 52mm
- Size 7: 54.5mm
- Size 8: 57mm
- Size 9: 59.5mm
- Size 10: 62mm
- Size 11: 64.5mm
- Size 12: 67.5mm
- Size 13: 72mm

In order to know your size, we advise you to bring one of your Rings in order to measure it using the same technique as for the bracelets, by taking the inside measurement of your Ring or directly on your finger with a measuring tape. dressmaker or a paper. You can also take your finger size with a ring sizer available commercially or on the internet.

Length of Earrings

The length of our Earringss are displayed directly on our product sheets in the descriptive part. We advise you to refer to this section before contacting us in case of doubt!

Drop here!

Necklace personalized name or word

Regular price €16.00
Sale

Stones

Aquamarine Amazonite Amethyst black obsidian Hawk Eye Bull's eye Aventurine Citrine Carnelian Rock crystal Peridot moon stone Quartz rose Fluorine Garnet Howlite Jade red jasper Rhodochrosite Sodalite black tourmaline Jaspe mokaïte Turquoise Mother-of-pearl and freshwater pearl Labradorite Lapis Lazuli Chalcedony Malachite Eye of tiger No added stone

Materials

Stainless steel Gold Plated Stainless Steel

Hurrify, only a few left:

Quantity

Join Waitlist

Inform when this item available:

Available: Available

Share on Facebook Tweet on Twitter Pin on Pinterest

Description

A unique Necklace with the first name or word of your choice. In order to make it even more unique, you can choose a "baroque" stone added to the Necklace or select the "no stone" option.

The Necklace personalized first name is delicate and fine. It is formed by hand with pliers and 0.7 mm silver or gold stainless steel wire. This Necklace can be personalized with any word or first name up to 9 letters.

The length of the Necklace is approximately 40 cm + 5 cm extension.

A unique Necklace with the first name or word of your choice. In order to make it even more unique, you can choose a "baroque" stone added to the Necklace.

The length of the Necklace is approximately 40 cm + 5 cm extension.

Being made of stainless steel, it does not blacken, rust or oxidize, so it is possible to wear it in all circumstances, be careful, however, to check the properties of the stone you have chosen and which may not be compatible with exposure to water, for example.

Best gift for a bridesmaid, new bride or bride-to-be, friend, teacher, child, teenager, or anyone for whom it's hard to find an original gift!

The Necklace personalized first name is delicate and fine. It is formed by hand with pliers and 0.7 mm silver or gold stainless steel wire for a delicate and fine result.

They are completely handmade and each one is unique and individualized. This Necklace can be personalized with any word or first name up to 9 letters.

Non-contractual photo, because unique.

The shape and size of the added baroque stone is random and unique. Some stones can be more flattened, rounder, more elongated, more oval...

The first names on the photos are for example, the letters being made by hand may vary in appearance.

(The stones present in the photos are Rhodochrosite for the pink and Labradorite for the grey.)

Maintenance tips :

In order to preserve the brilliance and beauty of your jewellery, we advise you to follow these few recommendations.

Keeping the shine:

The stones being natural, they are likely to vary in appearance over time. We advise you to keep your jewelry in a bag or closed box away from humidity.

Preserve them from prolonged exposure to sun and water to retain all their original beauty. Also avoid contact with cosmetics and household abrasives.

Regularly use a soft, dry cloth to gently clean them to prevent their natural tarnishing.

In contact with the skin:

We have made every effort to select non-allergenic and quality materials to minimize any skin risk in contact with our jewelry.

However, we recommend that you carry out an exposure test on your skin before wearing them for a long time.

Ambrolia jewelry is delicate and fine, requiring careful and careful handling.